Produce perfect mortise pockets for the Hafele H7 Concealed Hinge. This hinge requires a two-step mortise, a deep mortise in the center @ 29mmx 69.5mm and a shallow or finish mortise for the finish depth @ 29mm x 111.5mm. Set your router for the deep center pocket and make your cut. Remove the two red 'block-off' tabs that divide the pocket on the template, set your router for the shallow or finish cut, complete the mortise and you're finished. Supplied with two nail assemblies as shown and there are two door and jamb thickness adjustment stops on the underside of the tool. This router template will work on both doors and jambs. Move the template to each position to complete your mortises on the jamb and door. Use a 1/2" router bit with a 5/8" od template guide on your router.

Stock Number: Hafele H7