|Strike Template 1-1/8" x 2-3/4" 'T'||$45.00|
|Details: 1-1/8" x 2-3/4" "T" & Dead Bolt strike|
This template will create the finish mortise for the strike plate when installing ”T” strikes with a finish size of 1-1/8” x 2-3/4” and also deadbolts with the same dimension. A red plastic block off plate is installed across the ”T” part of the pocket with two screws to form the deadbolt pocket (as shown in the photo). This template finish size is also included on our four pocket Multi-Strike template, Stock Number MS-400. Just like all of our Router Templates, use a 5/8” outside diameter router template guide on your router and a 1/2” hinge mortising bit with this template. See our model TG-1 Router Template Guide and our CB-1 or CB-4 Hinge Mortising Bits, both are Featured Items on our Home Page. If you are purchasing our CB-4 Mortising Bit to use with this template, you should also order our Top Mount Bearing Kit. See the TBK-1 kit in the “Carbide Router Bits” section, on the Home Page under “Cutting Tools” As shown in the photo this template is furnished with a center locator to align the template in the hole bored into the door jamb. Mating “Dust Box” template is on this page, see ST-151Dust Box.
Stock Number: ST-151B