|Cal-Royal CR3D51 Concealed Hinge||$54.00|
|Details: Cal-Royal CR3D51 Concealed Hinge: Mortise size 1-3/16" x 5-1/8"|
Produce perfect mortise pockets for the Cal-Royal CR3D51 hinge. Mortise size is 1-3/16” x 5-1/8” This hinge requires a two-step mortise, a deep mortise in the center and a shallow or finish mortise for the finish depth. Set your router for the deep center pocket and make your cut between the red tabs on the template. Remove the two red 'block-off' tabs that divide the pocket on the template, set your router for the shallow or finish cut, complete the mortise and you're finished. Supplied with two nail assemblies as shown and there are two door and jamb thickness adjustment stops on the underside of the tool. This router template will work on both doors and jambs. Move the template to each position to complete your mortises on the jamb and door. We also make this hinge size in a Full-Length configuration with 3, 4, or 5 pockets for the door height required, contact us for more information.
Stock Number: CR3D51