Order Desk (800) 578-9677

Tools for Lock and Hinge Installation   •   Door Hardware Installation Tools Contact Us Shopping Cart (0)

Special Application

Emtek 1-3/4

Click the image for a larger version

Emtek 1-3/4" x 6" Flush Pull $98.00
Details: Emtek 1-3/4" x 6" Flush Pull, Flush Mount Installation with ABS Insert

Emtek Modern Flush Pull (1-3/4" x 6") Flush Mount Installation. This template mounts the face of the hardware flush to the outside surface of the door with the use of an ABS plastic insert. The finish size of the mortise produced to inset the hardware is 1-3/4” x 6” and is produced by removing the ABS plastic insert. The size of the mortise pocket created to receive the deeper part of the hardware is 1.460" x 4.920" and is produced with the ABS plastic insert installed. Hardware centerline is set at 2-1/2" from the door edge using the included edge stops.  Use your router to produce the perfect pocket to receive this hardware. Please note that this particular type of hardware can have dimension differences from part to part, we produce these templates to the specs supplied by the hardware manufacturer and from samples that we have measured. You should check your hardware for these differences; a trial installation may be prudent.

Note: Photo shows sample hardware, it is not included.

 

 

 

Stock Number: Emtek FP-2 Flush Mount

Back to other Special Application products