Order Desk (800) 578-9677

Tools for Lock and Hinge Installation   •   Door Hardware Installation Tools Contact Us Shopping Cart (0)

Special Application

Halliday Baillie Pocket Door Latch & Face Prep Halliday Baillie Pocket Door Latch & Face Prep Halliday Baillie Pocket Door Latch & Face Prep Halliday Baillie Pocket Door Latch & Face Prep Halliday Baillie Pocket Door Latch & Face Prep

Click any image for a larger version

Halliday Baillie Pocket Door Latch & Face Prep $329.00
Details: Halliday Baillie Pocket Door Template HB 695 Edge Pull Template

Halliday Baillie: HB695 Sliding Pocket Door Privacy Lock. This three sided wrap-around template makes installing this hardware a “breeze” as it automatically aligns the edge prep with the face preps on both sides of the door, the only adjustment that you may need to make is for door thickness; template is set for 1-3/8" door but can be adjusted to 1-3/4" using the four steel adjusting brackets that are included.

Door Edge Prep produces a finish mortise @ 1" x 6.125". If using a router to produce the deep pocket; use the included white ABS insert to produce the .625" x 5" x 3" (76mm).  Extra Long router bit is required to complete the deep pocket mortise, see below.

The face prep on both sides of the door have a finish mortise @ 1.055" x 9.25" and is set with the center of hardware @ 55mm from door edge, allowing the perfect intersection of the latch throw pin to lock body arm. All mortises use a 1/2" router bit with a 5/8" OD template guide. If you need to install this hardware into a thicker door, contact us. Additional items that you may need to make this installation are shown below, including the Strike Template for this hardware:

 

HB 690 Jamb Strike Template

LRB- Extra Long Router Bit

SRB-1 Standard Router Bit  

TG-1 Template Guide

Stock Number: HB 695 P/D Edge Pull Template

Back to other Special Application products