Template for the Ashley Norton Flush Pull. This template will install the hardware flush with the door face. Finish mortise dimension is: 2.025" x 5.955". It also produces the deep pocket for the hand hold by using the white ABS insert. Clamping the template to the face of the door will put the hardware centerline located 2-3/8" from the door edge using the included red plastic door edge stops. You will use the standard setup for your router, a 1/2" router bit and a 5/8" OD template guide. The photos show the hardware with the template but it is not included.

Stock Number: Ashley Norton FP-1