|Emtek Classic Pocket Door Latch & Face Prep||$270.00|
|Details: Emtek PD/LF Classic: Wrap-Around Style|
Check your hardware, be sure it is the "Classic" configuration !
Emtek ClassicPocket Door Mortise Prep. Three sided wrap around template. Edge finish mortise @ 7/8" x 8-1/16" with a deep pocket mortise of 5/8" x 6-1/4" for the lock body. User must use a 7/8" OD template guide & 1/2" cutter to produce the deep pocket. All other mortises will use our standard 5/8" OD template guide and 1/2" router bit. Door face prep on both sides of door @ 2-3/16" x 6-7/16" with a 2-3/16" backset centered on lock centerline. Clamp-On legs set for 1-3/8" door thickness but can be adjusted for a thicker door. Note: template cannot be used on doors thinner than 1-3/8" as supplied. If you need the template to work on thinner doors please state in the comment section upon checkout that you need the template to work on a specific door thickness, such as 1-1/4" as an example. If you are installing the strike on the jamb to work with this lock, we have the template available, see the link below, under "Additional Items you may need"
Additional items you may need:
Stock Number: Emtek PD/LF Classic
|Support and Help Files: Emtek Classic Pocket Door Mortise Prep rev 2.2.2017.pdf|