|Rocyork RY-80 Concealed Hinge Template||$58.00|
|Details: Rocyork RY-80 Concealed Hinge Template|
Produce perfect mortise pockets for the 'Rocyork RY-80 Hinge'. Mortise size is 1.183” (30.05mm) x 6.299” (160.05mm) for the shallow mortise and 1.183” (30.05mm) x 5.080” (129.05mm) for the deep pocket mortise. This hinge requires a two-step mortise, a deep mortise in the center and a shallow or finish mortise for the finish depth. We have also simplified the configuration of this template to keep the cost down; in place of a full radius of (15mm) on deep pocket in the corners we provide a 1/4" radius in the corners of the deep pocket. Set your router for the deep center pocket and make your cut between the red tabs on the template. Remove the two red 'block-off' tabs that divide the pocket on the template, set your router for the shallow or finish cut, complete the mortise and you're finished. Supplied with two nail assemblies as shown and there are two door and jamb thickness adjustment stops on the underside of the tool, see photo inset at left. This router template will work on both doors and jambs. Move the template to each position to complete your mortises on the jamb and door. We also make this hinge size in a Full-Length configuration with 2, 3, 4, or 5 pockets for the door height required, contact us for more information. This template can also be made as a "Clamp-On" style (for doors only) which will avoid nail holes in your doors. See link here for the Clamp-On Kit See: TG-1 Template Guide here See: Router Bit for this template.
Stock Number: RY-80-1
|Support and Help Files: RY-80 Instructions.pdf|