Order Desk (800) 578-9677

Tools for Lock and Hinge Installation   •   Door Hardware Installation Tools Contact Us Shopping Cart (0)

Special Application

Emtek Edge Pull Template 3/4 Emtek Edge Pull Template 3/4

Click any image for a larger version

Emtek Edge Pull Template 3/4" x 4-1/16" $119.00
Details: Emtek Edge Pull Template 3/4" x 4-1/16" with mortise pockets

Emtek Edge Pull Template designed for the Emtek Model 2221 hardware with a finish mortise of 3/4” x 4-1/16”. This template is the modified version of our Emtek EP-1 template. This template does the finish size of 3/4" x 4-1/16" but it also does the two mortise pockets needed to create the clearence for the hardware pivot and finger pull. Motising without the red plastic tabs in place produces the finish mortise of 3/4" x 4-1/16" x 3/32" deep. Mortising between the red plastic tabs produces the shallower pocket of 3/4" x 1" x 3/8" deep and the deeper pocket of 3/4" x 1-3/8" x 1-5/8" deep. Note: A longer router bit is required to produce the 1-5/8" deep pocket. See our Extra long Router bit here: LRB-2. This template is a Clamp-On style that provides a firmer work surface over the Nail-On style template and allows the use of a larger router when making the deeper mortise pockets for this hardware and is also adjustable for door thickness. Template length is approximatly 18"

A sample of the Emtek Model 2221 Edge Pull hardware is shown to the left.

Stock Number: Emtek EP-2

Support and Help Files: Emtek2.pdf
Back to other Special Application products