|Deltana Olive Knuckle Hinge||$72.00|
|Details: 6" Olive Knuckle Hinge (6045 & 6050)|
Template set for Deltana 6045 & 6050 Series hinge with a 6” x 7/8” leaf. The 6045 is a 4-1/2" wide hinge and the 6050 is a 5" wide hinge. Deltana olive knuckle hinges are handed for left and right hand door swing and require the use of two templates, a Left Hand and a Right Hand configuration. These templates are sold in pairs, one left and one right. As with all of our templates, you will need a 1/2” cutter and a 5/8” router template guide attached to your router to complete the installation of your hinges. If you need a template guide or a 1/2” carbide cutter to work with this template please see our model TG-1 Template Guide and model CB-1 Carbide Hinge Mortising Bit. Note: we make these templates smaller by 0.005 for the width of the leave, we have found that the hinge leaves tend to run smaller. We also can produce a Multi-Pocket Full Length template for these hinges. Contact us for more information.
Deltana Disclaimer: Please note that over the years we have found that the dimensions on the Deltana Olive Knuckle Hinge are not consistent and appears to have a very “loose” manufacturing tolerance. For this reason we cannot guarantee that your hinges will fit into the mortises that our templates produce. If you’re not willing to accept wide gaps and or considerable hand work to make the hinges fit into the mortises, Do Not purchase these templates.
Stock Number: Deltana 6045 / 6050
|Support and Help Files: Deltana 6050.pdf|