|Dust Bucket template for ST-161G||$47.00|
|Details: Dust Bucket template for the ST-161G|
Picture at the left shows the top and the bottom sides of the template, the ”Dust Bucket” and the ”T-Strike”. This template will produce the mortise for the Dust Bucket (15/16” x 3-7/16” as shown in the picture for the (1-1/4” x 4-7/8” ASA ”T” Strike. After producing the ”T” Strike mortise using the ST-161G Template (ST-161G template not included), insert the white locating tabs on the bottom of the Dust Bucket template into the strike mortise that you created with the Strike Template, use the included nail assemblies to attach the template to the door jamb or use the two screw holes provided in the template to attach the template to the door jamb by using two wood or drywall screws. If you use the wood or drywall screws to attach the template there will be no visible holes in the jamb as the screw holes are located in the strike mortise under the strike plate after installation of the strike plate. Use a 1/2” cutter and a 5/8” OD template guide with this template. Mated template for this application is our ST-161G shown on this page.
Stock Number: ST-161G-DB