Order Desk (800) 578-9677

Tools for Lock and Hinge Installation   •   Door Hardware Installation Tools Contact Us Shopping Cart (0)

Special Application

Accurate Flush Pull 2002 Type

Click the image for a larger version

Accurate Flush Pull 2002 Type "S" $83.00
Details: Accurate Flush Pull 2-1/4" x 7"

Accurate style "S" Flush Pull Template, for mortising the outside of the flush pull flush with the door face finish size is: 2-1/4” x 7”. Recessed deep pocket dimension, 2” x 5-9/16”. Step1; Clamp template edge flush to edge of door, this will set the centerline of the hardware at 2-3/4” backset. Step 2; with white block-off tabs removed using a 1/2” router bit with a 5/8” outside diameter template guide on the base of your router mortise the outside finish dimension. Step 3; change the router bit to a 1/4” cutter and with the white block-off tabs installed mortise for the deep pocket recess of 7/16” or 11/32” per your application. Using a corner chisel see (Stock Number CC-1) cut the corners of the mortise and install the hardware. NOTE: You must use a template guide on your router when mortising the deep pocket mortise when completing step #3. See our TG-1 Template Guide here.

 

Stock Number: FP-2002-S

Back to other Special Application products