|Lamp Hinge by Sugatsune||$128.00|
|Details: Lamp HES3D-160 Concealed Hinge, Pair|
Note: This Hinge: Lamp HES3D-160 has been replaced by Sugatsune, the new model is HES3D-E160 and requires only a single template, not a pair.
Router Template Set for the Lamp Concealed Hinge by Sugatsune. One pair for door & jamb hinge application. Door leaf finish size is: 29mm x 160mm. Jamb leaf dimension is 31mm x 160mm with an ABS plastic overlay to allow for the use on rabbited jambs or where the door stop has already been applied. Template also produces the deep mortise of 115mm long (between the red tabs shown in the picture) on both templates. When using a standard 1/2” mortising bit to produce your mortise, there will be a very small amount of hand work required on the mortise corners because the hardware has a 6mm (.236”) radius and the 1/2” cutter produces a .250” radius in the corner of the mortise pocket.
Suggusted Template Guide for this application: TG-1 Template Guide
Suggusted Router Bit for this application: Standard Router Bit
Stock Number: Lamp HES3D-160
|Support and Help Files: Lamp 160(3).pdf|