|Lamp Hinge by Sugatsune||$116.00|
|Details: Lamp HES3D-190 Concealed Hinge, Pair|
Note: This hinge has been replaced by the Lamp Hinge Model: HES3D-E190 by the hinge manufacturer. Be sure that you are ordering the correct template.
Router Template Set for the Lamp Concealed Hinge by Sugatsune. One pair for door & jamb hinge application. Door leaf finish size is: 30mm x 190mm. Jamb leaf dimension is 32mm x 190mm with an ABS plastic overlay to allow for the use on rabbited jambs or where the door stop has already been applied. Template also produces the deep mortise of 140mm long (between the red tabs shown in the picture) on both templates. When using a standard 1/2” mortising bit to produce your mortise, there will be a very small amount of hand work required on the mortise corners because the hardware has a 6mm (.236”) radius and the 1/2” cutter produces a .250” radius in the corner of the mortise pocket.
Suggusted Template Guide for this application: TG-1 Template Guide
Suggusted Router Bit for this application: Standard Router Bit
Stock Number: Lamp HES3D-190
|Support and Help Files: Lamp Hinge.pdf|