Order Desk (800) 578-9677

Tools for Lock and Hinge Installation   •   Door Hardware Installation Tools Contact Us Shopping Cart (0)

Spur Bits

15/16

Click the image for a larger version

15/16" Carbide Tipped Spur Bit $79.00
Details: 15/16" Carbide tipped spur bit, 1/2" dia. Shank with 3/8" hex end

Our newest design with all Carbide Cutting Surfaces which include: two Chip Lifter teeth, two Carbide Spur teeth and the Carbide center point, overall length is 8 inches. This new open head design passes wood cuttings through the cutter head better than the old style multi-tooth cutter head. Each tool is guaranteed to work in our quick-release adapter and run smoothly in our Bore Master fixture, providing 100's of cuts. High quality micro grain carbide cutting surfaces are welded to each cutter face and tip providing a service factor of at least 10 to 1 over regular carbon steel spur bits. Templaco Carbide Tipped spur bits will work in any brand name boring jig fixture including: Classic Engineering, Porter-Cable, Kwik-Set, Schlage Lock, Pro-Lock and any other fixture that uses a 1/2” inside diameter bushing to guide the bit. (You must use our Templaco Quick-Release adaptor (Model AD-603 or AD-603HD) if you purchase a Templaco bit to be used in another brand name fixture). Length overall is 8” including the hex shank and cutter head. Not designed for Drill-Press Use. NOTE: Carbide Spur Bit Disclaimer 

Stock Number: MS-402-6C

Back to other Spur Bits products