|Bore Master Lock Installation Kit BJ-102-C3||$519.00|
|Details: Bore Master Lock Installation Kit, with Carbide Spur Bits.|
This is the original Templaco Bore Master Junior Lock Installation Kit, finish machined and assembled here in the USA for over 35 years, not a cheap Chinese Knock Off.
We're being asked why is our Junior kit is more money than our Deluxe kit. Simple, we make and sell 10 to 1 more Deluxe kits over the Junior kit and the two "Mortise Markers" included in the Junior kit are expensive to produce. Other than that, all components are the same
This kit does not have router templates to produce the mortises for the jam and door hardware like our BJ-115 kit but does include two mortise markers; a 1” x 2-1/4” to mark the outline of the latch plate on the door and a 2-1/4” x 'Full Lip' strike plate on the jamb for completing the mortises with your own chisel. Always insist on Carbide Tipped Spur Bits when you purchase any lock installation kit from us or the competition. This kit is supplied with our best Templaco door boring fixture that is adjustable from 2-3/8” to 2-3/4” backset positions and for doors from as thin as 1” to 2-3/8” thick, (for thicker doors up to 3 inches please contact us for the added cost). Kit includes a 1” Carbide tipped spur bit for boring edge-bore holes, a 2-1/8” Carbide spur bit for boring the cross-bore hole and an 1-1/2” Carbide Tipped spur bit is included for boring dead bolt holes. To complete the kit we include a 1/2” heavy duty hex drive quick-release drill adapter to chuck the bits into your drill motor, an 1-1/2” reducer ring to use with the 1-1/2” spur bit and an aluminum latch bore strike center marker with a stainless steel point. This complete kit is enclosed in a rugged black plastic case. Remember these kits are assembled here in Southern California and when you need parts or service on your Templaco Bore Master, we’re right here and we’ve been doing this for 40 years.
Stock Number: BJ-102-C3