Order Desk (800) 578-9677
Tools for Lock and Hinge Installation
Door Hardware Installation Tools


Tools for Lock and Hinge Installation   •   Door Hardware Installation Tools

Contact Us Shopping Cart (0)

Mortise Lock Installation

Schlage Schlage

Click any image for a larger version

Add to Shopping Cart

Schlage "L" Series Drill Guide $54.00
Details: Drill guide for Schlage "L" Series

Schlage, ”L” Series, Drill Guide, made from solid cold formed steel (not plastic) and welded into a precision ”T” shape. Take that paper template provided by the lock manufacturer and use it as a reference guide only. This solid 1/8” thick steel drill guide template provides for all 7 of the hole locations that you will need when installing the ”L” Series locks made by Schlage. After you complete the finish mortise for the lockset on the edge of the door, slide the DG-S1 Drill Guide locating tab into that mortise, this action will place the drill guide flat on the outside face of the door and then using your drill-motor, drill each 1/8” pilot hole in the exact location as prescribed by Schlage. After drilling the pilot holes use the proper drill bit size to complete each hole. You can't make a mistake, your drill won't wonder off centerline and each pilot hole is perfectly aligned for its finish hole size. Need other Drill guides for Baldwin, Sargent, Falcon or other Mortise Locksets… call us, we are designing new tools all the time. (companion product = Latch Template, Model LT-141ASA, finish size 1-1/4” x 8”, see listing under ”latch only”)

Stock Number: DG-S1

Support and Help Files: DG-S1.pdf

Add to Shopping Cart

(Back to other Mortise Lock Installation products)



Copyright © 2012 Templaco Tools Inc. All rights reserved.

Privacy Policy